Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Gould 220S: (1 year) CAL VER /5520
DATE:                  02-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       10
NUMBER OF LINES:       83
=============================================================================
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   Sub Gould 220S Full Scale Attenuator /5520
#   Sub Gould 220S Linearity /5520
#   Sub Gould 220S Sensitivity Ctrl Chk /5520
#   Sub Gould 220S Square Wave Resp /5520
#   Sub Gould 220S Frequency Resp /5520
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        V
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: 20 min. - REQUIRED
  1.004  DISP         Temperature: 18 - 28 degC
  1.004  DISP         Humidity: <75%
  1.005  DISP         [32]                WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  RSLT         =CHANNEL 1 TESTS
  1.007  DISP         Set CHANNEL 1 and CHANNEL 2 SENSITIVITY Controls to OFF.

# Channel 1
  1.008  MEM2         =Ch1
  1.009  CALL         Sub Gould 220S Full Scale Attenuator /5520
  1.010  JMP          2.001
  1.011  EVAL   dummy
  2.001  CALL         Sub Gould 220S Sensitivity Ctrl Chk /5520
  2.002  JMP          3.001
  2.003  EVAL   dummy
  3.001  CALL         Sub Gould 220S Linearity /5520
  3.002  JMP          4.001
  3.003  EVAL   dummy
  4.001  CALL         Sub Gould 220S Square Wave Resp /5520
  4.002  JMP          5.001
  4.003  EVAL   dummy
  5.001  CALL         Sub Gould 220S Frequency Resp /5520
  5.002  JMP          6.001
  5.003  EVAL   dummy
  6.001  DISP         Set the CHART SPEED to STOP
  6.002  RSLT         =
  6.003  DISP         Set CHANNEL 1 and CHANNEL 2 SENSITIVITY Controls to OFF.

# Channel 2
  6.004  MEM2         =Ch2
  6.005  CALL         Sub Gould 220S Full Scale Attenuator /5520
  6.006  JMP          7.001
  6.007  EVAL   dummy
  7.001  CALL         Sub Gould 220S Sensitivity Ctrl Chk /5520
  7.002  JMP          8.001
  7.003  EVAL   dummy
  8.001  CALL         Sub Gould 220S Linearity /5520
  8.002  JMP          9.001
  8.003  EVAL   dummy
  9.001  CALL         Sub Gould 220S Square Wave Resp /5520
  9.002  JMP          10.001
  9.003  EVAL   dummy
 10.001  CALL         Sub Gould 220S Frequency Resp /5520
 10.002  DISP         SET the CHART SPEED to STOP.
 10.003  END